3A SMS DIN Hygienic Stainless Steel Manual Aseptic Sample Valve
Application
It is mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the remains.
Working Principle
Sample valve: When turn the hand wheel clockwise, the valve shaft and seal rise up. Atthis time, Valve is open for sampling. When turn the hand wheel anti-clockwise, the valve shaft and seal go dowm, at the time, the valve is closed.
Yogurt Sampling Valve: The valve seat opens inside so that it can avoid opening by accident due to much pressure in the pipes.
The valve is normally closed (through close of spring). the valve is oprn as soon as pushing the handle with hand and closed then loosing up.
The design of completely drainage water is to avoid remains inside the valves.
Feature:
1. 304 stainless steel,316L stainless steel
2. Silicone O-ring plus plunger to assure a leak proof connection
3. Surface finish polish to sanitary standards
4. Recommended usage in wineries
5. End connections available: clamp, thread, weld
Technical specification
| Material of Product Wetted |
316L (DIN-1.4404) |
| Material of Non-product Wetted |
304 (DIN-1.4301) |
| Seal material |
PTFE/Silicone,PTFE/FPM (PV-1),PTFE (PV-2) |
| All seal materials comply with FDA 177.2600. |
| Continuous working temperature |
-10ºC/5F-120ºC/248F |
| Sterilization temperature |
150oC (Max 20min) |
| Working pressure |
10bar 145psl |
| Internal surface |
Ra0.8μm |
| External surface |
Shot blasting |
| Size |
DN6/M4,DN8/M4,DN15/W9 |
